Candle Making Tips For Beginners

Candle Making Tips For Beginners – Tips And Tricks From A Professional Candle Maker

Estimated Reading Time: 7 minute(s) and 2 second(s)

Candle making is one of the oldest and most popular craft traditions. Whether you’re a beginner or an experienced candle maker, these tips will help you create beautiful candles that bring joy to your home.

This guide teaches essential candle making tips for beginners using simple ingredients. But, don’t worry – even a novice can create beautiful candles with these tips.

candle making tips for beginners

                                                                                                   Source | Unsplash

Before We Begin: Essential Supplies

Candle making for beginners can be a fun and rewarding experience, but it does require some essential supplies. When starting, it is best to have all of the following items on hand:

  • A wick (ideally cotton, but other types of wicks can be used as well)
  • Tape measure or ruler
  • Paints or a paintbrush
  • Craft knife or scissors
  • Container to store finished candles (glass or metal)
  • Lighter or stovetop heat source

Here Are Some Guidelines to Help You Choose the Right Candles for Your Needs:

Candles for indoor use should use a wax low in toxins and fragrances. These types of candles are safe to burn in most homes.

For candles that will be used outdoors, choose a wax resistant to weathering and UV rays. This wax will last longer and is less likely to melt in the sun.

Choose a candle made with scented waxes or oils for weddings or special events. These types of candles are perfect for adding a little extra magic to your event.

Start by melting the wax you’ll need for your project in a double boiler. Be sure to use low enough heat, so the wax does not scorch or boil over.

Once the wax has melted, add your fragrance or essential oil and stir well. Be sure not to overheat the mixture; this can cause the wax to seize up and form clumps.

Pour the hot wax into your molds, allowing it to cool slowly before removing it from the mold. If you’re using votives or tea lights, be sure to trim off any extraneous edges before lighting.

Making Basic Candles

Once your supplies are ready, it’s time to start making candles! To make an essential candle, you must heat the wax in your heat tool. To do this, you’ll need to pour the wax into your jar or bottle and then place the heat tool over the top of the wax. Then, turn the heat on and wait for the wax to melt.

Once the wax is melted, add your fragrance or essential oil and stir well. Be sure not to overheat the mixture; this can cause the wax to seize up and form clumps.

Pour the hot wax into your molds, allowing it to cool slowly before removing it from the mold. If you’re using votives or tea lights, be sure to trim off any extraneous edges before lighting.

Choosing the Right Candles for Your Project

Candles are a popular choice for projects due to their versatility and fragility. When choosing candles for your project, there are a few things to consider. First, the type of candle you choose will depend on the project you’re trying to create. For example, if you’re making an altar or centerpiece, you might want something tall and lit from multiple sides. On the other hand, if you’re making a cake or other dessert, a short candle with just one wick might be better.

Another thing to consider when selecting candles is the material they are made from. Candles made from wax tend to be more fragile than those made from paraffin or oil. If your project requires delicate handling, wax candles may not be the best option.

Additionally, if your project will be displayed outside of the home (for example, at an event), choose a candle made from natural materials like beeswax instead of synthetic materials like soy wax or paraffin wax because these types of candles will not fade in direct sunlight.

Below Are Some Tips from A Professional Candle Maker Regarding Candle Making for Beginners

1) Choose the right wax. There are many types of wax to choose from when making candles, but the essential thing to consider is the type of wick you’ll be using. Most waxes come in two types: soft wax and hard wax. Soft wax is excellent for use with wicks with a diameter of less than 1/4 inch, while hard wax is better for wicks with a diameter of 1/4 inch or more.

2) Heat your candle container before adding your wax. When you heat the container, the temperature will rise above the melting point of the wax, breaking it down into smaller molecules and creating a more robust flame. This also ensures that your candle doesn’t drip because when molten wax touches metal, it forms a sooty substance called serene which clogs up your wick and causes your candle to drip (not to mention it smells awful).

3) Use 80% Beeswax as your base material because this will create a longer-lasting firework with less degradation over time. Serene is created when beeswax and metal come into contact, so if you use beeswax as your base material, it’s essential to make sure there isn’t any metal in the mix (for example, tools used during the manufacturing process). When working with beeswax, always use cold hands and keep the work area well-ventilated to prevent overheating and ruining your project.

4) Use Fragrance Oils sparingly because they contain chemicals that can chemically react with the wax, changing its properties. If a candle doesn’t have a fragrance oil added, it’s often because the beekeeper has chosen to use a natural or unscented wax.

5) When measuring your wax, be sure to use an accurate scale such as a metric one, so you don’t end up with a candle that is too big or too small. Once you have determined the weight of your wax, add it slowly to the melted container, constantly stirring with a wooden spoon to avoid clumps.

6) Always work in batches when making candles and keep the work area well-ventilated to avoid overheating and ruining your project. Wear gloves while melting and working with waxes to prevent staining your hands and nails with colorless wax residue.

7) When pouring molten wax into your molds, use a steady hand and an even stream to avoid bubbles and unevenness. If you find that the wax is too hot to handle, place it in the refrigerator for a few minutes until it has cooled down.

8) Once your candles are finished, carefully remove them from their molds and let them cool completely before storing them. Never put candles in direct sunlight or near any heat sources because this can cause them to melt or warp.

How to Make an Elegant Pillar Candle

Candle making can be a gratifying hobby; there are many different ways to make beautiful candles. This guide will show you how to make an elegant pillar candle. Start by gathering your supplies. You’ll need a container at least 3 inches tall, a wax mold, beeswax pellets, paraffin wax, and votive wicks.

Next, measure the height of your container and cut the wax mold to fit. Be sure to leave a 1-inch overhang on both ends of the mold so that you can secure the candle base later on. Finally, place the wax mold in the freezer for about 30 minutes to harden it.

Once the wax is hardened, place the votive wick in one end of the wax mold and fill up the rest with pellets until it levels with or slightly below the top of your container. Press down on the pellets so they are fully absorbed into the wax. Allow your candle to cool completely before removing it from its mold!

If you’re new to candle making, don’t be discouraged! There are many tutorials available online that will walk you through the process step-by-step. And if you ever get stuck, don’t hesitate to contact a professional candle maker for help.

How to Make a Custom Candle

Candle making is a fascinating and intricate craft requiring specific skills and techniques. If you’re new to candle making, look at these beginner’s tips to get started.

First, you’ll need some materials. Basic supplies include wax, wicks, and a container for your candles. You can find these items at most craft stores or online retailers.

Next, you’ll need to gather the essential candle making tools. These include a thermometer, ruler or yardstick, spoon or spatula, and knife or scissors. A quality set of candle making tools will make the process more enjoyable and efficient.

Once you’ve gathered your materials and tools, it’s time to start! First, melt your wax using your thermometer. Make sure the wax is melted completely before pouring it into your container. Once the wax has cooled slightly (this will take about an hour), add your wicks (if using) and pour the wax around them until they are fully submerged. The next step is trimming any excess wax around the wick area with a knife or scissors. Then, finally, light up those candles! Candle making is a fun and rewarding experience, so have fun with it!

When Candle Making Is Done: Store Your Candles Safely

Once you’ve finished candle making, it’s essential to store them safely so they don’t get ruined by moisture or light exposure.

First and foremost, you’ll need some essential supplies to start candle making. These include a candle making kit, beeswax, a jar or bottle for your melted wax, and a heat tool, such as a double boiler or the stovetop.


Candle making is a fun, easy, and affordable hobby that people of all ages can enjoy. With a bit of practice, you can create beautiful and unique candles that will add a touch of elegance to any room. So why not give it a try? Candle making is a great way to relax and unwind, and it also makes a beautiful gift for friends and family.


Related FAQ(s)

Is candle making profitable?

There are a few factors to consider when answering this question. First, to be profitable, a candle business would need to produce a product that is both high quality and in demand. The cost of materials and labor also needs to be taken into account, as well as the price at which the candles are sold.

Finally, businesses need to be aware of the competition in the marketplace and what strategies they can use to set themselves apart.

What should you not do when making candles?

When making candles, you must not use scents, dyes, or other additives. This is because these ingredients can alter the burning qualities of the candle, causing it to burn improperly and create soot. Using scents and dyes can also make the candle smell and look unnatural.

What is the easiest way to make candles?

The easiest way to make candles is to use wax that is already melted, such as a crayon or a candle. You can also use a stovetop or a microwave to melt the wax. If you are using a stovetop, be sure to use a pot that is big enough to hold the wax and has a handle so that you can hold it. If you are using a microwave, be sure to use a microwavable bowl or container.

How do you make homemade candles smell stronger?

Adding more scents to the wax can make a candle smell stronger. When you are melting the wax, add a few drops of fragrance oil to make it smell stronger. You can also add a little bit of essential oil to the wax. This will make the candle smell more potent, and it will also have some therapeutic benefits.

Why are my homemade candles sinking in the middle?

One possible explanation for your homemade candles sinking in the middle is that the wax is not melting evenly. This could be due to several factors, such as the room’s temperature, the type of wax you are using, or the design of your candle mold. For example, if the wax is not melting evenly, it will not burn evenly, which can cause the candle to sink in the middle. Another possibility is that there is too much air trapped in the wax.

Related Video(s)

Candle making tips for beginners

Tags: , , , , ,
Previous Post
Chocolate Candy Making For Beginners

Chocolate Candy Making For Beginners From Scratch – A Step By Step Guide!

Next Post
Calligraphy For Beginners A To Z

The Ultimate Guide To Learning Calligraphy For Beginners A To Z

Leave a Reply

Your email address will not be published. Required fields are marked *